Hikvision Facial Recognition Terminal
Call for Price
The Hikvision Facial Recognition Terminal is an access control device integrated with a temperature screening function, which supports Plug & Play – (Rapid Deployment, Free of Wiring, Installation or Configuration). Skin-Surface temperature can be taken quickly and can be widely applied in multiple scenarios such as Schools, Factories, Campus, Enterprises, Stations, homes and so on.
Contact Free – Multi-Person Detection – Plug & Play – 10.1 Inch Touch Screen – 2MP Camera – Face Recognition – Voice Prompts
The Facial Recognition Terminal is supplied with complete with the floor stand, equipped with a 2MP dual lens camera for face recognition and a Vanadium Oxide Uncooled Sensor that measures temperature. During face recognition, the individual should stand between 0.3m and 2m away from the terminal and has an accuracy rating of 99%.
Allowing up to 50,000 face capacity and 100,000 event capacity, the DS-K5604A-3XF/V can save this information to the users own software.
Face Mask Wearing Alert
As well as Face Recognition, the terminal can sense if the reoccurring face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance to the premises will be granted. If the recognising face is not wearing a face mask, the terminal will again issue a voice reminder whilst denying access to the premises.
Description
The Hikvision Facial Recognition Terminal is an access control device integrated with a temperature screening function, which supports Plug & Play – (Rapid Deployment, Free of Wiring, Installation or Configuration). Skin-Surface temperature can be taken quickly and can be widely applied in multiple scenarios such as Schools, Factories, Campus, Enterprises, Stations, homes and so on.
Contact Free – Multi-Person Detection – Plug & Play – 10.1 Inch Touch Screen – 2MP Camera – Facial Recognition – Voice Prompts
The Facial Recognition Terminal is supplied with complete with the floor stand, equipped with a 2MP dual lens camera for face recognition and a Vanadium Oxide Uncooled Sensor that measures temperature. During face recognition, the individual should stand between 0.3m and 2m away from the terminal and has an accuracy rating of 99%.
Allowing up to 50,000 face capacity and 100,000 event capacity, the DS-K5604A-3XF/V can save this information to the users own software.
Face Mask Wearing Alert
As well as Facial Recognition, the terminal can sense if the reoccurring face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance to the premises will be granted. If the recognising face is not wearing a face mask, the terminal will again issue a voice reminder whilst denying access to the premises.
Terminal Features
- Plug and Play – Supports Rapid Deployment – Free of Wiring, Installation or Configuration
- Supports Vanadium Oxide Uncooled Sensor to Measure Targets Temperature
- Temperature Measuring Range – 30 °C to 45 °C (86 °F to 113 °F), Accuracy: ± 0.5 °C without Black Body Calibration
- Fast Temperature Measurement Mode – Detects Face and takes Skin Surface Temperature without Identity Authentication
- Multiple Authentication Modes with Temperature Measure are Available
- Face Mask Wearing Alert – If the Recognising Face does not Wear a Face Mask – the Device will Prompt a Voice Reminder, at the Same Time the Authentication or Attendance is Valid
- Forced Face Mask Wearing Alert – If the Recognising Face does not Wear a Face Mask – the Device will Prompt a Voice Reminder, at the Same Time the Authentication or Attendance will be Failed
- Displays Temperature Measurement Results on the Authentication Page
- Triggers Voice Prompt when Detecting Abnormal Temperatures
- Configurable Door Status – Open/Close when Detecting Abnormal Temperatures
- Transmits Online and Offline Temperature Information to the Client Software via TCP/IP Communication and Saves the Data on the Clients Software
- Integrated Design with Stand Bracket
- Communicates with the Third Party Turnstile Via IO Output or Wiegand
- Adjustable Supplement Light Brightness
- High Performance Processor with Deep Learning Algorithm
- 50,000 Face Capacity, 100,000 Event Capacity
- Face Recognition Duration ≤ 0.2 s/User Face Recognition Accuracy Rate ≥ 99%
- Transmits and Saves the Comparison Results and the Captured Pictures to the Client Software or Others
- NTP, Manually Time Synchronisation, and Auto Synchronisation
- Watchdog Design for Protecting the Device and Ensuring the Device is Running Properly
- Audio Prompt for Authentication Result
- *Biometric Recognition Products are not 100% Applicable to Anti-Spoofing Environments. If you Require a Higher Security Level, Use Multiple Authentication Modes in Order to get an Accurate Temperature, After the Device is Powered on, you Should Wait for 90 Minutes to Warm the Device up
Terminal Specifications
- Operation System – Linux
- Sensor – Vanadium Oxide Uncooled Sensor
- Resolution – 120 x 160
- Frame Rate – 25 fps
- Temperature Range – 30°C to 45 °C (86 °F to 113 °F)
- Temperature Accuracy – ± 0.5 °C, without Black Body Calibration
- Measuring Distance – 0.5m to 1.5m
- Screen – 10.1 Inch Touch Screen
- Resolution – 1024 x 600
- Camera – 2MP Dual Lens Camera
- Recognition Distance – 0.5m to 1.5m
- Recognition Duration – ＜ 0.2 s
- Face Anti-Spoofing – Support
- Face Capacity – 50,000
- Event Capacity – 100,000
- Communication – TCP/IP
- Interface – LAN × 1, RS-485 × 1, Wiegand × 1, USB × 2, IO Output × 1, IO Input × 2, Lock × 1, Door Contact × 1, TAMPER × 1
- Audio Prompt – Support
- Two Way Audio – Support
- Power Supply – 12 VDC/2 A
- Working Humidity – 10 to 90% (No Condensing)
Reviews
There are no reviews yet.